Friday, December 09, 2016

Budapest VII

 There has been some significant development over the past couple of weeks. All the electrical conduits and power points have been installed, along with some of the cabling. The water and waste pipes are in and some have been buried in concrete. As plastering requires that the place isn't an ice box, the central heating boiler is installed and working, and all the radiators except the towel rail in the bathroom are warm. The radiators will of course have to come out again for final plastering and painting of the walls behind.

Let's see... Heating out, cold water in, hot water out, heating return, condensate
The boiler itself is a 'high-efficiency, fan-assisted, condensing' type, which means that it should be cheap to run. Exhaust fumes are physically blown up the chimney. There's no hot water tank; the boiler fires up on demand and is supposed to provide instant and practically unlimited hot water. A fresh-air intake was constructed within an existing ventilation duct, but this is going to need some finishing work so that it doesn't provide nesting space for the local avian wildlife.

I queried the rather basic boiler control panel, but the full set of controls are to be remotely attached to the wall in the living area where the main themostat is going.

Last look at the single huge room
 I anticipate the possibility of wall-mounted TV sets, so both sides of the plasterboard will have plywood backing to resist pull-out. I've had previous experience of the questionable strength of 20mm plywood to heavy objects affixed thereto. I'll keep careful record of where the plywood is located.

Those ceiling fans arrived four days after being ordered. These are sitting, boxed, in a different apartment until they can be fitted at the end of the renovation. A full set of bathroom fittings have been procured, except for a small wall-mounted sink for a vanity unit inside the main bedroom wardrobe. This will come from IKEA along with the wardrobes and indeed the kitchen.

The floor and wall tiles have arrived in Budapest and I paid for them. As the flat isn't yet ready for tiling, they're languishing in a warehouse. All the IKEA fixtures are similarly languishing, but these haven't yet been paid for. I'm assured no problem with any of the furniture as it's all definitely in stock, and if there's a sudden rush for SMØRGÅSÞÖERÐ reciprolating fondilators they can be obtained within a couple of working days.

And speaking of flooring, the wood floor for the main bedroom has been ordered. The rutted and wobbly parquet is up, and it turns out that levelling the floor is an easy fix. The floors in the flat consist of 300mm deep steel I beams with precast concrete forming the ceiling in the flat below. The void is filled with lightweight aggregate - slag - and surfaced with wooden planks. All the woodwork can come up and then be relaid at a more sensible single level.

Nasty underfloor planks need levelling
Bathroom with plumbing
I'm still waiting for the new entrance door and the windows; these are due for delivery on 14th December.

There remains an issue with the internal doors, in that no carpenter is interested in refurbishing the existing olde worlde woodwork.

I would prefer doors like this, but without the glass
I have found some 'classic' style modern doors, and await a price. I pointed out to the builder that the additional cost of the new doors should be offset against the time and labour cost of refinishing the old ones.

]}:-{>

No comments:

 

The opinions expressed in this weblog are the works of the Grumpy Goat, and are not necessarily the opinions shared by any person or organisation who may be referenced. Come to that, the opinions may not even be those of the Grumpy Goat, who could just be playing Devil's Advocate. Some posts may be of parody or satyrical [sic] nature. Nothing herein should be taken too seriously. The Grumpy Goat would prefer that offensive language or opinions not be posted in the comments. Offensive comments may be subject to deletion at the Grumpy Goat's sole discretion. The Grumpy Goat is not responsible for the content of other blogs or websites that are linked from this weblog. No goats were harmed in the making of this blog. Any resemblance to individuals or organisations mentioned herein and those that actually exist may or may not be intentional. May contain nuts.